![]() Place the glint on top left of the visor accounting for the seam allowance. Now stitch the glint to the visor, and the darts of the visor, main body part and the oxygen tank. If you have the time you can use the trick I shared above. Fold main body pieces in half with pretty (right) sides together and pin darts.These darts are so tiny that using this trick really helps If they are, hold the fabric tightly pull the pin out and pin the fabric about ¼ inch from the dart line so that you can sew without removing the pin. Check again whether the dart lines are aligned. If that is not the case, pill the pin a little bit and adjust the back layer. Check whether the pin went through the dart line on the back layer. Take a pin and push it near the top of the dart line through both layers of fabric. Let me share one tip with you that will help you pin and sew darts precisely. Fold oxygen tank in half diagonally, with the right sides facing and pin darts.You will need to pin the first darts on the oxygen tank front and both main body parts. If you’ve traced everything correctly, you will have 8 fabric pieces to work with. The only fabric piece you will cut according to pattern (without adding seam allowance) is the glint.Ĭut 1/4″ from pattern lines (except for the glint, that you cut according to pattern). MAIN FABRIC: main body part (x2), foot (x2), oxygen tank-front, oxygen tank-back.Note that the seam allowance is not included in the pattern, so you will have to leave 1/4″ seam allowance around each piece to account for the seam allowance. Trace plush pattern on the back of the fabric. STEP 2: Trace standing plushie pattern pieces onto fabric Cut out pattern pieces, trimming any excess paper. Print it at 100% (no scaling at all) on one piece of paper. INSTRUCTIONS: STEP 1: Prepare the standing crewmate templateĭownload the among us standing plushie pattern from the link to the template above. sewing machine (or you can handsew these)ĪMONG US character standing crewmate PATTERNĭOWNLOAD: among us crewmate plush pattern(Free PDF file).among us plush template (free download below).light grey/light blue and white fabric – little scraps for the visor and glint.main fabric – minky, velvet or fleece in the color of your choice 15″x 10″- purple, blue, cyan, green, red, orange, yellow, brown. ![]() How to make a Standing Crewmate Plush Supplies and tools 3.14 STEP 11: Attach the visor to the head of the crewmate.3.12 STEP 10: Sew the gaps closed using ladder stitch.3.9 STEP 7: Sew the body of the crewmate plushie.3.4 STEP 2: Trace standing plushie pattern pieces onto fabric. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |